24 December 2012
Comments: 0

Tips And Tricks On How To Do Plumbing Right

Tips And Tricks On How To Do Plumbing Right

Plumbing problems? You’re not alone. Despite how simple it is to solve most plumbing problems, many people do not know how to fix their own simple plumbing issues. If you’re one of these people and would like to avoid paying for the service, read on to find out how to become a plumbing expert!

You can remove unsightly mineral buildup from your shower head by soaking it in vinegar overnight. This loosens the deposits, and in the morning you only need to wipe off the residue with a rag. If your shower head is high up an not removable, place vinegar in a plastic bag, slip the bag over the shower head and hold in place with a twist tie.

Use strainers in all drains to catch hair and other objects. This will prevent all the material from going down the drain and causing a clog, which can cause a bigger problem down the line. Clean out the strainers daily so that you don’t start getting backup of water in your sink or tub.

When it comes to plumbing, there is never an unsolvable problem. If you feel yourself becoming frustrated with the project, you should try to take a break from what you are working on. The greatest mistakes start to happen when you become angry and inpatient, so take a break and walk outside.

When the temperature drops below freezing, protect exposed pipes from the weather by adding a source of heat near the pipes. Ranging from electrical tape applied directly to the pipes to small space heaters placed near exposed pipes, keeping the temperature above freezing can prevent costly repairs caused by frozen pipes.

The most common culprit in a running toiler is the flapper or the ball assembly. Both of these are easily replaced so check on these before running to call a plumber. If you have mineral deposit buildup in the tank, a try vinegar, boiling water and baking soda to help remove it and get your toilet back in tip top shape.

To avoid having your outdoor faucets freeze up in the winter, detach all hoses before the first freeze. Also, close the shutoff valve that leads to the outdoor faucets, then turn on the outdoor faucets to let any remaining water in the lines drain. Once temperatures warm up in the spring, you can reverse the process.

If you need to install a valve, find instructions on the type of valve you have. Some valves such as stop valves need to be installed in a certain direction to work properly. Make sure you understand how a valve works before you install it so you do not commit any mistakes.

As tempting as it may be to try and save on the heating bill, keep your furnace set no lower than 55 degrees over the winter to prevent inside pipes from freezing. If you have pipes located in an excessively cold basement, consider running a space heater in the basement, but only when it can be checked on frequently.

It is not always necessary to call in a plumber when you have a damaged section of pipe in your plumbing. There are repair kits you can buy in your local hardware store which are excellent in repairing leaks. If you have a small leak, you can rub a compound stick over the hole or crack in the pipe to seal it shut. Epoxy paste is also an excellent remedy for a leaking pipes. Make sure you turn off the water and completely dry the pipe before applying the epoxy.

Plumbing problems aren’t so tough to deal with when you have knowledge of how to fix basic plumbing problems. Next time you’re thinking of calling an expensive plumber, pull up this article instead and see if you can fix the problem yourself with the tips you’ve read here today.

Leave a Reply

Your email address will not be published. Required fields are marked *